Maintenance method of Q-type rock wool insulation and decorative integrated board

Maintenance methods of Q-type rock wool insulation and decorative integrated board:

Regular inspection:

Inspection frequency: At least twice a year, especially before winter and summer.

Inspection content: Check whether the board has obvious damage, cracks, bulging or falling off. Check whether the sealing parts such as sealing strips are aged and cracked to prevent the intrusion of rain, air, etc.

Special environment: In areas with a lot of rain, the joints and drainage system of the panels should be checked regularly to ensure that the rainwater can flow smoothly to prevent moisture from infiltrating and affecting the insulation performance.

Cleaning and maintenance:

Cleaning method: Use a soft brush or damp cloth to wipe the surface of the board to keep it clean and beautiful. Avoid using highly acidic or alkaline cleaners as they may corrode the decorative layer.

Note: Do not use a high-pressure water gun for cleaning to prevent water from penetrating into the insulation layer and affecting its insulation performance. For oil, paint and other stains on the surface, you can use a special cleaner, dilute it according to the instructions, and wipe it with a soft cloth.

Waterproofing:

Seam waterproofing: During installation, special attention should be paid to the waterproofing of seams and professional waterproof glue or sealant should be used.

Drainage system: Ensure that the drainage system around the curtain wall is smooth to prevent water from soaking the panels for a long time.

Repair and replacement:

Repair small cracks: If the sealant is found to be peeling off or cracking, it should be repaired and replaced in time. Small cracks can be repaired using professional caulking agents.

Replacement of large-area damage: For large-area damaged boards, the entire board needs to be replaced. When performing replacement operations, ensure that the new board is sealed and the connection with the old board is firm to avoid affecting its overall thermal insulation performance.

Environmental concerns:

Climate impact: Humidity, dryness, drastic temperature changes and other environments may lead to a decrease in material performance. For example, in cold areas, ensure that the insulation properties of the panels are good to prevent moisture from freezing and expanding inside.

Protective measures: In coastal areas, sea breeze and salt spray may corrode the panels, so protective treatments must be carried out regularly, such as applying anti-corrosion coatings.

Use and operation:

Avoid placing heavy objects: Avoid placing heavy objects on the surface of the board to prevent scratching or crushing the decorative layer.

Construction Note: For newly installed panels, within a few months after construction, avoid exerting excessive pressure or weight on them, and try to avoid cleaning their surfaces to speed up their curing process.

Maintenance records:

Establish records: In order to ensure systematic maintenance, it is recommended that users establish regular maintenance records, including inspection and cleaning time, materials used, problems found and treatment methods, etc. Through recording, you can have a clearer understanding of the status of the system and make timely adjustments and processing.