What are the construction techniques for rock wool insulation integrated panels?

Rock wool insulation integrated board is an exterior wall insulation material composed of rock wool and decorative panels. It has the functions of heat preservation, heat insulation, fire prevention, noise reduction and other functions. The following is the construction process of rock wool insulation integrated board for your reference.

1. Construction preparation

1. Design briefing: Before construction, designers and construction teams need to conduct detailed technical briefings to clarify the structure and construction requirements of the integrated panels.

2. Confirm materials: Confirm the model, specification and quantity of the integrated board, as well as the variety and quantity of auxiliary materials such as adhesives and sealants.

3. Base treatment: Clean the wall surface to remove oil stains, floating dust and loose layers to ensure that the surface is smooth, dry and free of open water.

2. Material processing

1. Cut the integrated board: Cut the length and width of the integrated board according to the wall size to ensure accurate dimensions.

2. Process the anchors: According to the design requirements, process the anchors on the back of the integrated board to ensure that the number and position of the anchors meet the specification requirements.

3. Installation and construction

1. Paste the integrated board: Apply adhesive on the wall and stick the integrated board on the wall to ensure that it is firmly and flatly adhered.

2. Install the anchors: Insert the processed anchors into the reserved holes of the integrated board and tap lightly with a hammer to fix them to the wall.

3. Glue treatment: Apply sealant to the gaps between the integrated panels to ensure that the gaps are tight and prevent water seepage.

4. Install accessories: Install doors, windows, vents and other accessories as needed.

4. Quality acceptance

1. Check the flatness: Use a 2-meter ruler to check the flatness of the integrated board. The error shall not exceed 3 mm.

2. Check the anchors: Check whether the number and location of the anchors meet the design requirements.

3. Check the sealant: Check whether the sealant is full, even, and free of bubbles, cracks, etc.

4. Processing of acceptance results: rectify the parts that fail the acceptance until they meet the specification requirements.

5. Things to note

1. Construction temperature: The ambient temperature during construction should not be lower than 5°C, and the wind force should not be greater than level 5.

2. Moisture-proof treatment: In humid environments, moisture-proof agent should be applied to the base layer.

3. Protection of finished products: During the construction process, attention should be paid to protecting the installed integrated panels to avoid collisions and scratches.

4. Safety measures: Pay attention to safety during construction and wear protective equipment such as safety helmets and gloves.

6. Maintenance

1. Cleaning and maintenance: Wipe the surface of the integrated board regularly with a damp cloth or neutral detergent to keep it clean and beautiful.

2. Repair and replacement: If the sealant is found to be peeling off or cracking, it should be repaired and replaced in time.

3. Service life: Under normal use conditions, the service life of integrated panels is generally 25 years.